CONTROL OF ALGAE AND BACTERIAL ODORS IN SWIMMING POOLS
Apply 1 tablespoon of Simply Blue for every thousand gallons of pool water. This will result in a concentration of .5 to 1.0 ppm of dissolved copper.
Dissolve the required amount of Simply Blue in a plastic container and pour the solution into the pool.
Use the higher rate where visible algae is present.
For maintenance dosage, dissolve one to two tablespoons of Simply Blue in a plastic container and pour the solution into the pool.
Never add Simply Blue while swimming.
During heavy usage shock pool once a week and use a filter clarifier.
Always test copper levels using a copper test kit.
Note: Simply Blue is NOT recommended for gunite/cement pools and may cause staining in fiberglass pools. To avoid staining keep the levels lower (around .5 PPM).
|